Metal Distribution Box: What It Is, Types & How to Choose the Right One
A distribution box is the point where one incoming power supply is split into several protected outgoing circuits. Inside a metal enclosure, breakers, busbars and terminals work together to deliver power safely to lighting, machinery, sockets or downstream boards.
If you are sourcing for a construction project, a factory upgrade, or your own product line, the metal distribution box is probably the most specified - and most misunderstood - item on your electrical list. This guide walks through what it actually does, what is inside it, and how to specify one correctly.

Key Takeaways
- A distribution box divides an incoming supply into individually protected outgoing circuits.
- Metal enclosures (carbon steel, stainless steel) offer the best mechanical strength and heat handling for industrial use.
- "Distribution box" can mean an empty enclosure or a fully wired assembly - always confirm the supply scope.
- Selection depends on load, circuit count, fault level, environment and mounting conditions - not enclosure size alone.
- OEM customization (dimensions, cutouts, color, logo) is often the fastest way to match an existing installation.
How Does a Distribution Box Work?
The working principle is straightforward, and understanding it makes selection much easier:
- Receive the supply. A main breaker or switch disconnects the incoming power. A plain switch isolates but does not protect - overcurrent protection must come from a breaker or fuse.
- Distribute internally. Busbars or distribution blocks carry current from the incoming device to each outgoing breaker.
- Protect each circuit. Outgoing MCBs or MCCBs trip when a circuit draws too much current or develops a short circuit, isolating only that branch.
- In practice, this means a fault on one machine trips one breaker - not the whole workshop. That is the entire point of the distribution box: organized, selective protection.
Main Components of a Metal Distribution Box
| Component | What it does | What to check before ordering |
|---|
| Enclosure (carbon/stainless steel) | Houses and protects the assembly; provides IP rating against dust and water | Material thickness, IP rating, surface treatment (powder coating, galvanizing) |
| Main switch / incoming breaker | Disconnects the supply; breaker version adds overcurrent protection | Rated current, poles, breaking capacity |
| Busbars or distribution blocks | Feed current from incoming device to outgoing breakers | Current rating, pitch, compatibility with your breakers |
| Outgoing breakers (MCB/MCCB) | Protect each outgoing circuit | Number of ways, trip characteristics, breaking capacity |
| Neutral & earth bars | Termination points for N and PE conductors | Number of terminals, bar size |
| DIN rails & mounting plate | Support for breakers and internal devices | Rail length, plate position, spacing for heat |
| Cable entries (glands/knockouts) | Sealed entry points for incoming and outgoing cables | Size, quantity, position, thread type |
One practical note from the factory floor: enclosure steel thickness matters more than most buyers expect. Thin steel doors warp over time, hinges loosen, and the IP seal fails. For industrial distribution boxes, 1.2–2.0 mm cold-rolled steel with powder coating is the practical baseline; harsher environments call for stainless steel 304 or 316.
Types of Metal Distribution Boxes
The same product is often described from three different angles - function, installation, and the devices inside. Here is how they overlap:
By Position in the System
| Type | Position | Typical use |
|---|
| Main distribution board | Receives the main supply, feeds downstream boards | Building intake, plant power entry |
| Sub-distribution box | Fed from a main board, serves one area | A workshop floor, a tenant unit, a production line |
| Final distribution box | Feeds end circuits | Lighting, socket, small equipment circuits |
By Installation and Environment
| Type | Identifies | Key question |
|---|
| Wall-mounted distribution box | Fixed on a wall surface | Is there clearance for the door swing and cable routes? |
| Floor-standing distribution cabinet | Larger assembly on its own base | Does the site allow anchoring and front access? |
| Outdoor distribution box | Built for external exposure | Do the IP rating, coating and glands match the actual weather? |
| Industrial distribution box | Serves machinery or factory loads | Are load size, fault level and heat dissipation addressed? |
By Internal Devices
An MCB distribution box houses miniature breakers for final circuits (lighting, sockets, small motors). An MCCB distribution box uses moulded-case breakers for higher currents - typically the incoming side or large feeders. Most industrial metal distribution boxes combine both: an MCCB incoming, MCBs outgoing.
Empty Enclosure or Complete Assembly?
This is the single most common cause of quotation disputes, so it deserves its own section.
| Supply scope | You receive | You must still confirm |
|---|
| Empty metal enclosure | Box, door, mounting plate, hardware | All breakers, busbars, wiring |
| Enclosure with mounting provisions | Above plus rails/plates | Which electrical parts are included, if any |
| Complete wired assembly | Devices installed and connected per drawing | Final test records, circuit schedule |
Do not judge by the product photo - a catalog image full of breakers may show an empty box as an example. Always ask for the bill of materials.
If your own panel builders will populate the box, give them the enclosure drawing (dimensions, plate position, entry positions) before ordering. If you need a fully wired unit, the factory needs your single-line diagram or circuit schedule.
How to Choose the Right Metal Distribution Box
1. Define the Supply and Loads
Confirm voltage, phase, frequency, earthing system and total demand. Note any large motors or inverter loads - starting currents affect breaker selection.
2. Count the Circuits and Allow Space
List every outgoing circuit with its load and device type. Then add 20–30% spare ways - expanding a fully packed box later means buying a new one.
3. Check Fault Ratings
The breakers and the assembly itself must handle the prospective short-circuit current at the installation point. This is a design value, not a guess - your electrician or engineer should confirm it.
4. Match the Enclosure to the Environment
- Indoor, clean, dry: powder-coated carbon steel, IP54 is usually enough.
- Outdoor or washdown: stainless steel or properly coated steel, IP65, with sealed glands.
- Coastal or chemical exposure: stainless 316; salt air eats ordinary coatings.
- Remember that an IP code covers dust and water jets - not every chemical or temperature extreme. If your project specifies NEMA types, verify that separately.
5. Plan Mounting, Access and Heat
Surface mount or floor stand? Door swing direction? Cable entry from top or bottom? Breakers generate heat, so a dense box in a hot room may need derating or ventilation - and any ventilation must not compromise the IP rating.
6. Specify Standards and Documentation
For low-voltage assemblies, the IEC 61439 series governs verification. Individual breaker certificates do not make a complete assembly compliant. Agree who verifies what before ordering.
Distribution Box vs. Distribution Cabinet vs. Junction Box
| Term | Practical meaning |
|---|
| Distribution box / board | Assembly that divides a supply into protected outgoing circuits - the two terms are used interchangeably |
| Distribution cabinet | Usually a larger, floor-standing version of the same function; no fixed size boundary |
| Junction box | Houses cable joints only; no branch protection |
| Control cabinet | Houses control/automation equipment; may also distribute power |
Frequently Asked Questions
Can I use one distribution box for both AC and DC?
The enclosure, yes. The devices inside, no - breakers, switches and surge devices must be rated for the actual supply. Specify AC or DC when ordering the assembly.
Can I mix breaker brands in one box?
Physically they may fit the same DIN rail, but busbar compatibility and verified coordination are not guaranteed. Stick to combinations your supplier has tested.
What is the difference between a distribution box and a DB box?
Nothing - "DB box" is just shorthand for distribution board/box, common in some markets. Confirm whether devices and wiring are included either way.
What documents should come with a complete assembly?
Circuit diagram, circuit schedule, component list, ratings and test records. For an empty enclosure, ask for dimensional drawings and material/rating specifications.
Do you support custom sizes and branding?
Yes - custom dimensions, special cutouts, non-standard colors and your own logo are routine OEM work. Send a drawing or even a sketch, and confirm feasibility before production.
Metal Distribution Box Supplier Checklist
| Item | Confirm with supplier |
|---|
| Supply scope | Empty enclosure / partially fitted / complete wired assembly |
| Electrical system | AC or DC, voltage, phases, frequency, earthing |
| Circuits | Circuit schedule, device types, spare ways |
| Fault performance | Required short-circuit rating |
| Enclosure | Material, thickness, IP rating, coating, dimensions |
| Installation | Mounting method, entries, door swing, access space |
| OEM requirements | Custom size, cutouts, color, logo, packaging |
| Delivery | Drawings, BOM, test records, lead time |
Find a Metal Distribution Box for Your Project
Start with the supply scope, then match the enclosure and configuration to the site. At QHECO we manufacture metal distribution boxes in carbon and stainless steel - from standard wall-mounted models to fully custom assemblies - with OEM support for special cutouts, dimensions and private labeling.
Send us your specification or a single-line diagram, and we will confirm feasibility, lead time and a detailed quotation.
