Product Overview

 

A Metal Distribution Cabinet is an engineered electrical enclosure designed to house, organize, and protect primary/secondary power distribution switchgear and industrial automation control systems.


Selecting the appropriate enclosure requires a comprehensive technical evaluation beyond basic external dimensions. Professional buyers must consider the internal electrical components, available mounting clearance, cable entry configurations, installation orientation, material grade, and the required ingress protection level against dust and moisture.

 
First 123 Last
 
Materials and Construction
 

Enclosure construction is specified according to operational requirements and internal component loading.

Enclosure Body

Formed from cold-rolled steel (CRS) or corrosion-resistant stainless steel (AISI 304 / 316L). Sheet thicknesses are engineered to maintain structural integrity under full load.

Door and Access

Single or double-door configurations featuring concealed pin hinges with an optimized opening arc and multi-point locking arrangements.

Internal Mounting

Factory-fitted or adjustable hot-dip galvanized steel mounting plates, compatible with supplementary DIN rails and wiring trunking.

Cable Entry

Removable bottom gland plates equipped with mechanical compression glands or rubber knock-out membranes to secure cable management.

Surface Finish

Multi-stage preparation including iron-phosphate conversion treatment followed by an electrostatic exterior-grade powder coat layer.

Environmental Protection

Maintained via continuous polyurethane (PU) foam-in-place door gaskets and sealed entry interfaces to uphold ingress ratings.

 

Technical Specifications

 

Parameter

Specifications & Details to Confirm

Cabinet Dimensions

Standard heights (600mm - 2000mm), widths (600mm - 1000mm), depths (300mm - 600mm) / Custom sizes available

Enclosure Material

Cold-Rolled Steel (CRS) / Stainless Steel (AISI 304 or 316L)

Sheet Thickness

Body: 1.5mm - 2.0mm

Installation Method

Wall-mounted, floor-standing, or plinth-mounted configuration

Door Configuration

Single door, double door, or specialized interior access arrangement

Internal Mounting

Galvanized mounting plate, DIN rails, and accessory mounting channels

Cable Entry

Bottom gland plate positions, knock-outs, and mechanical entries

Surface Finish

Iron-phosphate treated, textured RAL 7035 powder coat (or custom RAL)

Ingress Protection

Verified IP54, IP65, or IP66 rating (IEC 60529) / NEMA equivalents

Compliance Standards

CE compliant, ISO 9001 manufactured, RoHS compliant

 

For project-specific electrical or environmental constraints, provide installation parameters and layout schematics for comprehensive engineering review.

 

Metal Distribution Cabinet Low Voltage Distribution Cabinet

 

Manufacturing and Quality Control

Production processes and verification procedures are executed under established manufacturing protocols.


Sheet Metal Processing: Laser cutting and precision panel bending ensure linear dimensional tolerances within plus/minus 0.2mm.


Structural Assembly: Robotic MIG/TIG welding secures continuous, crack-free joints, backed by visual and liquid penetrant checks where applicable.


Surface Protection Testing: Coated samples undergo salt spray exposure (ASTM B117) to verify corrosion resistance, coating adhesion, and edge coverage.


Dimensional & Functional Audit: Final inspections cover squareness, door alignment, latch tension, and gasket compression. Material Mill Test Certificates (MTC) and inspection reports are available upon request.

 

 

Configuration and Customization

Enclosure customization accommodates specific electrical layouts, spatial limitations, and project specifications.


Custom Dimensions: Custom dimensional ratios and structural modifications.
Door Configurations: Specialized door configurations, viewing windows, and locking mechanisms (e.g., swinghandle or double-bit inserts).
Internal Accessories: Pre-installed internal mounting plates, DIN rails, and terminal blocks.
Cable Entry and Ventilation: Tailored cable entry cutouts and auxiliary ventilation provisions.


Provide dimensional drawings, electrical schematics, or bill of materials (BOM) to streamline the technical review and quotation process.

Metal Distribution Cabinet Low Voltage Distribution Cabinet

 

FAQ

 

Q: What information is needed to select a Metal Distribution Cabinet?

A: Provide target dimensions, internal electrical component layout, installation method, cable entry preferences, and required environmental protection ratings or project standards.

Q: Can cabinet dimensions and panel cutouts be customized?

A: Yes. Customization depends on manufacturing parameters and design feasibility. Submit dimensioned drawings or cutout specifications for engineering evaluation prior to ordering.

Q: Can mounting plates, DIN rails, and wiring ducts be pre-installed?

A: Yes. Internal accessories can be factory-installed upon receipt of your electrical layout schematics or component BOM.

Q: How should the required IP rating be determined?

A: Evaluate exposure to environmental contaminants like dust and water jets. Ensure the selected cabinet configuration—including seals, doors, and cable glands—is verified to the corresponding IP rating.

Q: What physical checks should be performed prior to installation?

A: Verify external dimensions, internal mounting clearance, door swing clearance, cable entry points, and ground continuity in accordance with local electrical installation codes.

Q: What technical documentation is supplied upon request?

A: Available documentation includes dimensional drawings, product specifications, material certificates (MTC), inspection records, and IP/standard conformity test reports.

As one of the most experienced metal distribution cabinet manufacturers in China, we also support customized service. We warmly welcome you to buy durable metal distribution cabinet for sale here from our factory. If you have any enquiry about cooperation, please feel free to email us.

Send Inquiry